Description
Brake Bleeder with 1.2 litre Container
Features:
JWL Brake Bleeders are used for bleeding and refilling the brake systems of all types eg. Vehicles, quickly and cleany by a single person
JWL Brake Bleeder are also suitable for bleeding other closed fluid systems.
Must never be used for explosive fluids eg, petrol & diesel.
Handle: as standard, with a handle, which can be used for both hanging and roll up.
Hose Relief: The relief spring and the rotatable hose protects the hose against break. Made in Plastic = no corrosion
Rubber Pipe: Rubber pipe with improved ergonomic. Produced in a long lasting plastic material.
Single Operation:
Assemble: Fi the rubber pipe on to the escape valve and loosen
Bleed: Activate the handle until you can see (through the hose), that the brake fluid is free of air bubbles.
Complete: Tighten the escape valve and remove the rubber pipe. Repeat the same procedure for each brake caliper. Remember to control the fluid level.
Use for instance the JWL refilling system while you are bleeding.
Technical Specifications:
Working Pressure: 6-12 bar (87-174 psi)
Air Consumption: Max 180 l/min at 8 Bar
Container: 1.2 litre
Vacuum: Minimum 60%
Thread: BSP / NPT
Materials:
Handle & Trigger: Acetal plastic
Valve: Acetal Plastic
Gasket / o-rings: EPDM
Spring: Hardened spring wire
Containers: PE
Hoses: PVC
Rubber nozzles: TPU
Features:
JWL Brake Bleeders are used for bleeding and refilling the brake systems of all types eg. Vehicles, quickly and cleany by a single person
JWL Brake Bleeder are also suitable for bleeding other closed fluid systems.
Must never be used for explosive fluids eg, petrol & diesel.
Handle: as standard, with a handle, which can be used for both hanging and roll up.
Hose Relief: The relief spring and the rotatable hose protects the hose against break. Made in Plastic = no corrosion
Rubber Pipe: Rubber pipe with improved ergonomic. Produced in a long lasting plastic material.
Single Operation:
Assemble: Fi the rubber pipe on to the escape valve and loosen
Bleed: Activate the handle until you can see (through the hose), that the brake fluid is free of air bubbles.
Complete: Tighten the escape valve and remove the rubber pipe. Repeat the same procedure for each brake caliper. Remember to control the fluid level.
Use for instance the JWL refilling system while you are bleeding.
Technical Specifications:
Working Pressure: 6-12 bar (87-174 psi)
Air Consumption: Max 180 l/min at 8 Bar
Container: 1.2 litre
Vacuum: Minimum 60%
Thread: BSP / NPT
Materials:
Handle & Trigger: Acetal plastic
Valve: Acetal Plastic
Gasket / o-rings: EPDM
Spring: Hardened spring wire
Containers: PE
Hoses: PVC
Rubber nozzles: TPU